ELECTROMAGNET COMPATIBILITY
This device was designed to satisfy the currently required requisites for electromagnetic compatibility (EN 60601-1-2).
Electro-medical devices require particular care during installation and use relative to EMC requirements. Users are therefore
requested to install and/or use these devices following the manufacturer’s specifications. Risk of potential electromagnetic
interference with other devices. Mobile or portable RF radio and telecommunication devices (mobile phones or wireless
connections) may interfere with the operation of medical devices. For more information, visit the website www.flaemnuova.
it. The appliance may be susceptible to electromagnetic interference in the presence of other devices used for specific
diagnoses or treatments. Flaem reserves the right to make technical and functional changes to the product without prior
notice.
22 -
ENGLISH
SYMBOLS
Class II device
Manufacturer
Temperature limit
Tipe BF applied part
Alternate current
Atmospheric pressure limit
Important:
check the operating instructions
Power adaptor for
household use
Humidity limit
Direct current
Plug for safety extra low voltage
DISPOSAL
PACKAGING
Switch
“ON”
When you shut off the
device, the switch will
interrupt the com-
pressor function only
on one of the two
power phases
CE mark for medical devices ref.
Dir. 93/42 EEC and subsequent
amendments
20
PAP
PBox
product and power supply
Switch
“OFF”
TÜV approval
04
LPDE
Bag
product packaging, tube, ciga-
rette lighter cable
Outlet for safety extra low
voltage
Serial number
05
PP
Heat shrink film accessories
In compliance with European
standard EN 10993-1 Biological
evaluation of medical devices
and 93/42/EEC Medical Devices
Directive
IP21
Enclosure protection rating:
IP21.
(Protected against solid
bodies over 12 mm. Protected
against access with a finger;
Protected against vertically
falling water drops).
02
HDPE
Bag packing bag
Summary of Contents for Wi.Neb P0209EM
Page 23: ...ITALIANO 23...
