Flaem SfigmoLife Pro, User Manual

Page: 20 / 26

37
36
MEASUREMENT
START
STOP
Adjust the zero. LCD display
Inflating and measuring. Display and save the
measurement result.
Start the Measurement
2 .Press the “START•STOP” to power
off, otherwise it will turn off
within 1 minute.
Tips: Maximum 250 records are both for User A and User B.
Recall the Records
2
The most recent record (1) is shown first. Each new measurement is
assigned to the first (1) record. All other records are pushed back one
digit (e.g., 2 becomes 3, and so on), and the last record (250) is
dropped from the list.
CAUTION
DATA MANAGEMENT
Pul/min
MEMORY
TIME/DATE
S
M
START
STOP
Pul/min
MEMORY
TIME/DATE
S
M
START
STOP
A/B
A/B
Pul/min
MEMORY
TIME/DATE
S
M
START
STOP
Pul/min
MEMORY
TIME/DATE
S
M
START
STOP
A/B
A/B
Pul/min
MEMORY
TIME/DATE
S
M
START
STOP
A/B
The current No. is No 2. The corresponding
time is P.M. 10:08.
The corresponding
date is January 2nd.
The date and time
of the record
will be shown
alternately.
Pul/min
MEMORY
TIME/DATE
S
M
START
STOP
Pul/min
MEMORY
TIME/DATE
S
M
START
STOP
A/B
A/B
. Press the “MEM” or “SET” to get the record you
want. Press and hold the “MEM” button to look
over ten groups of the historical records quickly.
3 . If you want to look over another user’s data, press the User button to select
the desired user. Then you can look over its historical records.
1 . When the monitor is off,
please press the “MEM”,it will display the
latest record first when the records are less than
three groups. When there are more than three
groups ,it will display the average value of the
latest three records first.
1
. When the monitor is off,press “START•STOP button to turn on the monitor,
and it will finish the whole measurement and save the measurement data for
the desired user.(Take User A for example.)
Notes: you can select user A or B by pressing User button during the process
of measurement or when it is in the memory mode.