Flaem Aspira go P1611EM-20, Instructions For Use Manual

Page: 18 / 98

16
ACCESSORY COMPARTMENT
The accessory compartment (17) can easily be removed for thorough cleaning. See the disassembly se-
quence on page 2 in drawings 8-9-10-11.
CANISTER HOLDER
For convenience, the canister holder can be detached and reattached on the most suitable side (left or right).
Using a tool (dwg.12) release the canister holder from the bottom of the device (dwg.13) and turn it so that is
disengaged (dwg.14). Reattach it, repeating the procedure in the reverse order, on the chosen side.
Ensure that the canister holder is properly fastened to the bottom of the device. This system ensures the
connection of up to two canister holders. (dwg.15)
ACCESSORY SPECIFICATIONS
- single-use hydrophobic antibacterial/antiviral filter
- PC collection canister w/ compl. lid
- Ø 13 x 7.5 mm L 1300 mm silicone tubing
- Ø 13 x 7.5 mm L 250 mm silicone tubing
- Ø 13 x 7.5 mm L 40 mm silicone tubing
- CH18 single use sterile aspirator tip
- manual vacuum flow control (single use)
MICROBIAL CONTAMINATION
In the presence of pathologies with the risk of infection and microbial contamination, we recommend personal
use of the accessories, collection canister and connecting tubing (consult your doctor).
Interactions:
The materials used for contact with the secretions are highly stable and chemical resistant thermoplastic
polymers (PP, PC, SI). We cannot, however, exclude interactions. Therefore, it is suggested: a) to always
avoid prolonged contact of liquid with the canister or tubing and sanitise immediately after use. b) Should
anomalous situations occur, i.e. softening or cracking of the accessories, quickly terminate the procedure and
substitute the used materials. Contact the authorised service centre and specify how the product was used.
Note: Use only with original FLAEM accessories.