SLUSH PUPPiE
®
MAKER – INSTRUCTIONS FOR USE
5
x2
Motor Base
Drinks Tray
assembly
6
Push the Inlet Cap into position in
the Ice/Salt Inlet.
7
Carefully pull the Drinks Tray out from
the Motor Base until it is fully extended.
Inlet Cap
Ice/Salt Inlet
Canister
Lid
using the machine
Making Slush Puppies
Are you ready? Feeling thirsty?
Let’s make some Slush Puppies!
Watch a Video
For top tips and guidance on
making perfect Slush Puppies
a video can be found at:
slushpuppie.fi zzcreations.com
or simply scan here.
1
Plug the SLUSH PUPPiE Maker
into an appropriate mains power
supply and check that it is
switched on at the socket.
2
Press the Mix/Off/Dispense
switch to position I (Mix).
Tap in closed
position
3
Ensure the Tap is in the
closed position.
IMPORTANT
It is very important that your
SLUSH PUPPiE Maker is working
before you add ice; otherwise the
motor or blade could freeze.
4
Remove the Inlet Cap and half fi ll
the Ice Canister with ice through
the Ice/Salt Inlet. This is indicated
by the ICE and SALT marker on
the Canister Lid.
5
Pour 2 inlet caps of salt into the
Ice/Salt Inlet.
IMPORTANT
Add salt to the Ice Canister only.
The salt will not be consumed;
it is used to stop the ice mix
from rapidly freezing.
40ml
6
Pour 40ml of water into the Ice
Canister through the Ice/Salt Inlet.
7
Fill the rest of the Ice Canister with
ice cubes through the Ice/Salt Inlet.
Note:
The ice level should be at least
3cm below the rim of the Ice Canister.
