SLUSH PUPPiE
®
MAKER – INSTRUCTIONS FOR USE
4
Hexagonal
Socket
Slush Puppie
Container
Top of
Couple
Ice Canister
Ice Canister
Cage
Hexagonal
Socket
Hexagonal
Mount
Ice Canister
4
Insert the assembled Ice Canister
into the Slush Puppie Container.
Make sure the Hexagonal Socket on
the Ice Canister aligns with the top
of the Coupler in the Slush Puppie
Container and slots fi rmly into place.
Canister
Lid
Locking Catch
Locking Notch
Central Spindle
of Ice Paddle
Mount on
underside of
Canister Lid
Ice Canister
Cage
Ice
Canister
Ice Paddle
Assembly
Indent
Clips
Indents
Slush Puppie
Container
Tap
Motor Base
Coupler
Drive
Sprocket
Drinks Tray
1
Insert the Slush Puppie Container
onto the Motor Base. Make sure
the Coupler on the Slush Puppie
Container is correctly aligned with
the Drive Sprocket and slots fi rmly
into position. The Tap should sit
directly above the Drinks Tray.
3
Insert the Ice Canister complete
with Ice Canister Cage into the Ice
Paddle Assembly so that the Clips
line up with the 3 Indents. Make
sure the Ice Canister is correctly
seated. Carefully push each Clip
into place. A loud ‘click’ will indicate
each Clip is securely in position.
2
Insert the Ice Canister Cage
into the Ice Canister. Make
sure the Hexagonal Socket on
the Ice Canister Cage aligns
with the Hexagonal Mount in
the Ice Canister.
5
Fit the Canister Lid into
place. Make sure the
Slush Puppie logo is at
the front and the text
displaying FRONT on
the Canister Lid is facing
forwards. Push down
on the front of the lid
and then the rear. The
Central Spindle of the Ice
Paddle assembly should
be fi rmly in place in the
mount on the underside
of the Canister Lid.
Secure the Locking
Catch onto the rear
Locking Notch of the
Slush Puppie Container.
Your SLUSH PUPPiE Maker can make a maximum of 1 litre of Slush Puppie mix in one go.
PLEASE NOTE
that the Slush Puppie mix will reduce in volume when the slush starts to form.
DO NOT
exceed the maximum capacity of 1 litre of liquid in the Slush Puppie Container as indicated by the ‘Max Fill’ level
on the front of the container. This will result in the liquid overfl owing into the Ice Canister, mixing with the salt and ice.
TIP: Using Your SLUSH PUPPiE Maker
assembly
It’s almost time for some Slush Puppies.
First, let’s get the SLUSH PUPPiE Maker ready for action…
DO NOT
p
lug the power cord into the mains electrical supply until the SLUSH PUPPiE Maker is fully assembled. Before using for
the fi rst time, clean any removable parts with a soft sponge and washing up liquid. Thoroughly rinse with clean water and dry.
