13
14
AND SETUP NTRIP/CORS
PAIR TO WI-FI
CONTENT OF
NAV-VR1.CFG
[network]
ssid = “abcdef”
psk = “1234567890”
[rtknav]
reference-src = account:password@ip:port/mountpoint
Connect the NAV-RTK Sensor via USB, a folder will open
In the folder, you can find a file called “nav-vr1.cfg”
If it doesn’t exist, create a new file titled “nav-vr1.cfg” and enter the
information you see on the left
Input the ssid and psk values of your Wi-Fi
On Windows use Wordpad instead of Editor to get correct line breaks
Input your NTRIP/CORS account in reference-src
(only for Network RTK)
Save “nav-vr1.cfg” and close it
Safely remove the drive
(important)
Remove the USB cable,
NAV-RTK will then connect to your Wi-Fi
1.
2.
3.
4.
5.
6.
7.
