Fixpoint 51095 User Manual Download Page 11

11

8   Troubleshooting:

Problem

Help

The product does not heat up.

Check, if enough butane gas is inside the tank 
and if the control lever is turned on.

The soldering result is inadequate.

Use another soldering tip or adjust the soldering 
temperature.

other questions and problems

Keep the product away from fire sources and 

consult your dealer.

9  Warranty and Liability:

•   The producer grants a 2 years guarantee to a new device.

•   As the manufacturer has no influence on installation, warranty of the product only

  applies to the product itself.

•   If any fault or damage is detected on your device, please contact your dealer and provide

  your sales slip or invoice as evidence of the purchase, if necessary. Your dealer will

  repair the fault either on site, or send the device to the manufacturer. You make the work

  of our technicians considerably easier, when you describe possible faults in detail – only

  then you can be assured that faults occurring only rarely will be found and repaired with

  certainty!

7  Care, Maintenance, Storage and Transport:

ATTENTION! Risk of injury by burning! 

Never touch heated parts!

Let the product cool down completely after working!

ATTENTION! Risk of fire by short-circuit and overheating! 

Mind adequate ventilation and use fire-resistant and solid surfaces!

Keep away from fire sources!

•  Switch off the device and let it cool down completely!

•   Clean the product only with a dry linen. Be careful with the cleaning to avoid

  scratches. For intensive pollution you can damp the linen with some water. Do not use

  cleaning supplies and chemicals, because they can corrode the plastic material.

•  Remove residues carefully with a small knife.

•  Empty the gas completely before transport or storing.

•   Avoid places with high temperatures, humidity, or places which can become wet, also    

  during maintenance, care, storage, and transport.

•   Please store your product in a dry and dustproof surround when not used for longer    

  time. The product must be stored impenetrably for children. 

•   Please retain the packaging to avoid damages during transport.

Summary of Contents for 51095

















Reviews: