FiveFish SK-1DI, Assembly Manual

Page: 38 / 47

Copyright © 2017 FiveFish Audio SK-1DI Mic DI Assembly Guide
5. PRE-FLIGHT CHECK
Before applying power to the unit, please review your work one last time.
Go over Step 3, and in particular review the following specific items:
5.1 Perform a visual inspection. Check for any cold solder joints, or short circuit bridges.
5.2 Check if all diodes are installed in correct orientation.
5.3 Check if all polarized electrolytic capacitors are installed in correct orientation.
5.4 Check if all relays are installed in correct orientation.
5.5 Check if jumper to bypass IC4 is required (only required if using A12W-K Relays).
5.6 Check if jumper wires are required for Output Transformer location (if not using an Output Transformer).
5.7 Check if IC1, IC2, and IC3 are inserted in their correct locations and oriented correctly.