Five9 Network Systems LLC.
T3105K1 Installation Manual
Document # 000003, Rev 6, 05/06/2014
Page 4
3.0
Installation
3.1 Prior to Installation
The T3105K1 is a simple module to install. Before installation, the following items
should be considered:
3.1.1 Careful consideration of the location of the T3105K1 is necessary. Some
of the items to consider include:
Space to allow adequate airflow
Length of cable runs
Environmental conditions
Access for service repair (if applicable)
3.1.2 The T3105K1 shall be installed to conform to the standards designated by
the customer and manufacturer specifications as to the unit location and
type of installation.
3.1.3 The following installation instructions should be followed
A) Elevated Operating Ambient - If installed in a closed assembly, the
operating ambient temperature of the assembly environment may be
greater than room ambient. Therefore, consideration should be given to
installing the equipment in an environment compatible with the
maximum ambient temperature (Tma) specified by the manufacturer.
B) Reduced Air Flow - Installation of the equipment in a closed assembly
should be such that the amount of air flow required for safe operation of
the equipment is not compromised.
C) Mechanical Loading - Mounting of the equipment in the closed
assembly should be such that a hazardous condition is not achieved due
to uneven mechanical loading.
D) Circuit Overloading - Consideration should be given to the connection
of the equipment to the supply circuit and the effect that overloading of
