Assembly instructions for TROLLSTIGEN Wall Bars
GENERAL:
Always fasten the screws slowly and firm. However, do not mount the screws too
deep and tight. Remember, that the material is wood, and may crack if you are
using too much power. Once the Wall Bars are fully assembled, check that all
the screws are fully fastened.
Step 1
Cover the floor so that the
floor or Wall Bars will not
get scratches. Lay the first
long wooden side rail on the
floor.
Fit all the oval bars into the
long side rail. Use a rubber
mallet and carefully tap the
oval bars in place if it is
necessary. Bars are meant
to be tight.
