12
SPED MODE: SPEEDOMETER
Display
Pace, Speed, Calories, Heart Rate, Time, and Distance
Set
Weight, Interval Alerts, and Pace Zones
Store
walks and runs in
LOG
Reset
LOG
entries and Chart Data
S
TARTING AND
S
TOPPING THE
FS-1
FOR AN
A
CTIVITY
Press
START/STOP
to start and stop the chronograph and other readings. If the foot
pod is not worn, the chronograph can be used like a normal stopwatch and all other
fields will be blank. If the foot pod is on, distance and calories will accumulate when
the chronograph is running. The foot icon will be lit when the foot pod and watch are
communicating. . The heart icon will be lit when the heart rate monitor and watch are
communicating. The chrono icon will remain lit in any mode while the chronograph is
running.
Before you begin an activity, make sure the:
•
foot pod is turned on
•
foot icon is on solid
•
distance reads 0.00 miles
C
HANGING THE
SPED D
ISPLAY
In
SPED
mode, your activity distance will always appear in the upper right quadrant
and your elapsed time will appear in the lower right quadrant. You can control the left
side of the display as follows. Press
SELECT
in
SPED
mode to switch between "pace
display" (pace in minutes/mile and average pace in minutes/mile) and "speed display"
(speed in mph and calories). Your chosen display will be the new default display.
DISPLAY OPTIONS
(FOOT POD ONLY)
