19
MAINTENANCE INSTRUCTIONS
WALKING BELT CENTERING AND TENSION ADJUSTMENT
DO NOT OVERTIGHTEN the walking belt.
This may cause reduced motor performance and excessive
roller wear.
CENTERING THE WALKING BELT:
1. Place treadmill on a level surface
2. Run treadmill at approximately 5.5km/h, or 3.5 mp/h.
3. If the belt veers off the track to the right, screw the right adjusting bolt clockwise slowly to move
the belt to the center. (Attention: there is a gap between the belt and the right/left edgings. The
gap should be no more than
5mm
.)
4. If the belt veers off the track to the left, screw the left adjusting bolt clockwise slowly to move the
belt to the center.
Picture A:
If the belt has drifted to the RIGHT
Picture B:
If the belt has drifted to the LEFT
WARNING: ALWAYS UNPLUG THE TREADMILL FROM THE ELECTRICAL OUTLET BEFORE
CLEANING OR SERVICING THE UNIT.
PIC B
PIC A
