2
FORCE PLATE 1000 Kg
Capacity
FORCE PLATE 400 Kg Capacity
Fitness Technology, 21 Bishop Street, Skye SA 5072 Australia
Postal Address: PO Box 139 Fullarton 5063 Tel: +61 8 8331 9229 Mob: 0418 815 400.
www.fittech.com.au
Copy
right: Fitness Technology, Adelaide, Australia 3rd Feb 2020 Issue 1.00, 3rd Feb 2020
Page | 2
Specifications.
Capacity:
1000Kg Rated Force
Safety Factor:
Side-load rejection ratio 500:1
Safe side-load 100 % of R.C. Maximum safe central overload 150 % of R.C.
Ultimate central overload 300 % of R.C.
Physical Size:
795mm x 795mm x 60mm
Materials:
Carbon Fibre Platform with non-slip Top.
Load Cells complete with adjustable height feet assemblies that can adjust the height of the
Plate to approx 120mm
Sample Rate:
Maximum Sampling Rate of 1000Hz on all channels via BMS version 2 (BMSv2) software
program.
Integration:
400S+ Performance Force Plate + BMS Linear Position Transducer (LPT) is calibrated by
users on site via the BMSv2 software via Tools\Configure\Calibration (tab window)
Unique:
Only Performance Force Plate on the market with a footprint size large enough for every
users’ Centre of Mass (COM) to remain over this force plate for all testing functions for
accurate data collection all the time. It is also capable of running the BMS LPT & auto
saving all data files + outputting to Excel via the BMS software. It also measures uni-lateral &
bilateral R & L leg anterior / posterior & medio / lateral force - all done on this single 400S+
force plate!
Only Performance Force Plate on the market capable of running on our new InnerBalance
software tracking used to measure & record all anterior-posterior & mediolateral sway
movements.
Weight:
400S+, 14.5 Kg (32 lbs)
Operation:
Integral PCB Module operates 4 Load Cells + Output powered via 5 V DC Computer USB
Port only. Sensor type Steel Shear Beams rating 250Kg @ 3mV/V that are genuinely rated
to sample @ 1000Hz. Simply install the software onto your Hard Drive and then connect the
USB Cable plug into your Computer. The 400S requires no other power supply or charging
of batteries is required.
PCB monitors:
Sensors # 1
– 4 each have a Load cell cable connector 5 terminal plug (Molex) (four in total
as shown on pages 3&4) sensors # 1&2, 3&4 may share a Load cell cable connector 10
terminal plug (Molex) (two in total as shown on page 14). These connect to 4 Load cells.
(see page 6).
Outputs:
Communicates via 1 x USB 2.0 Cable that does not rely on Bluetooth or other wireless
connection to the laptop, so has NO internal batteries - annoying flat battery and recharging
issues are irrelevant!
Power:
Computer USB supplies 100% of power supply to operate the 400S from any PC or laptop
USB Port. 1
Cables:
1 x USB 2.0 Extension Cable 3 M Long provided with all 400S units. This mean zero
external RF interference.
Connections:
1 x RJ 45 Connection (located under the Force Plate) with connection lead supplied going to
1K Ohm Potentiometer on the BMS LPT Model
PT5A-150-V62-UP-1K-M6-632676A
this
LPT is an optional plug-in connection
– only used if barbell tracking data is also required to
be tracked simultaneously with the ground reaction force data (See pages 4 & 5).
