11
ASSEMBLY
Step 1
1A. Installing the Upright Frame
Connect the
Signal Wire II (62)
from the
Stabilizer (1)
to the
Signal Wire I
(51)
from the
Upright
Frame (46)
as you begin inserting the frame into the stabilizer. Secure the
Upright Frame (46)
into
the
Stabilizer (1)
with the
Curve Washers (63),
Spring Washers (23)
and four
Hex Bolts (7)
.
Tighten the bolts with the
Allen Wrench 6mm
provided. See
figure AA-1.
IMPORTANT:
While sliding the upright frame into the stabilizer, make sure the wires are installed
inside the upright frame and are not pinched or damaged. See
figure AA-1.
Hardware:
Allen Wrench 6mm
1PC
Tool:
(63) Curve Washer
4 PCS
(23) Spring Washer
4 PCS
(7) Hex Bolt
4 PCS
Summary of Contents for 2050H.3
Page 5: ...3 LABEL PLACEMENT ...
Page 10: ...8 OVERVIEW DRAWING ...
