FitLogic MIRACLE V570, Owner'S Manual

Page: 17 / 83

17
USER PROGRAM:
U1, U2, U3: Besides the 12 preset programs, you can also set up another 3
user’s programs for user’s programs as your need: U1, U2, U3.
1. User’s programs setting:
Press the button “PROGRAM” until it shows the user’s program
（
U1-U3
）
, then
press the “MODE” to enter into the setting. For the first section, press
“SPEED+”
、
“SPEED -” to change the speed, and press “”
、
“INCLINE
-” to change the incline. Press “MODE” to complete the setting of the first section
and also go to the setting of the next section till all the 10 sections are completed.
The setted data will be saved without losing due to the power off until next time
when you reset it.
2. Start-up of the user’s program:
Under the standby state, press “PROGRAM”until it shows the user’s program
(U1-U3), set the running time that you need and press the “START” button for
starting the treadmill.
3. User’s program set-up explanation:
Each user’s program divides time to be ten sections, the treadmill can only be
started after the speed and the incline are set well for the 10 sections and the
running time can also be set well.
Range of programs:
SETTING CONTENT
BEGINNING SETTING OF
BEGINNING
SET-UP
RANGE
DISPLAY
RANGE
TIME(MIN:SECOND) 0:00 15:00 5:00-99:00 0:00 － 99:59
INCLINE(%) 0 0 0-12 0-12
SPEED(K/h) 1.0 1.0 1.0-16 1.0-16
DISTANCE(K) 0 1.0 0.5-99.9 0.00
－
99.9
PULSE(hypo/min) P N/A N/A 50-200
CALORIE(THERM) 0 50 10-999 0
－
999