FitLogic MIRACLE V570, Owner'S Manual

Page: 12 / 83

12
completely, the unit will become STANDBY state.
5. “SPEED” window: On operation state, it will display the current speed, and
the speed range is 1.0-20KM/H(Kilometer) or 0.6-12MPH(Mile).
6. “PUL.” Window: When the user grasps the handle bar sensors, the pulse data
will be shown in the in the window, and the range is 50-200 times/min. (This
data is just for reference, do not use it as the medical data)
7. “PROFILE/LAPS” window: Display the program selected under standby state;
display standard racetrack position under running state.
BUTTON FUNCTION:
1. “PROGRAM” Button: When the treadmill is under standby state, press this
button to choose the exercise time “0:00” or the following 19 operation modes of
“P1-P2-P3-P4-P5-P6-P7-P8-P9-P10-P11-P12-P13-P14-P15-U1-U2-U3-FAT”
(FAT is the body fat testing function). Manual mode is the default mode with
speed 1.0 KM/H. (0:00 is manual model, P1-P15 is preset program and U1-U3 is
the user’s self-set program).
2
、
“MODE” Button
：
Press this button to choose the modes: “0
：
00”
、
“15
：
00”
、
“1.0” and “50” (“0
：
00” is manual mode, “15
：
00” is the time count-down mode,
“1.0” is the distance count-down mode and “50” is the calorie count-down
mode). When you choose each mode, you can press the speed button and incline
button to set the target count-down data, after that, press the START button to
start the treadmill.
3. “START” button
：
When the power is on and the safety key is attached onto the
console, press this button at any time, it can start the treadmill.
4. “STOP” button: While running the treadmill, press this button at any time to
stop the treadmill and return all the data back to 0.
5. “SPEED+”,“SPEED-” Button
：
After starting the treadmill, press “SPEED”
button to adjust the speed and the adjustment range of speed is 0.1km each
time. When pressing “SPEED” button for more than 0.5 seconds, the speed will
be continuously increased or decreased.