14
CHARGING THE SYSTEM
INSERTING THE FITLIGHTS™ INTO THE CHARGER CASE
The FITLIGHTS™ should be inserted into the Charger Case with the two contact points facing downwards to match and align with the contact
points in the Charger Case. Make sure that the contacts are in line with the contacts in the Charger Case and the “White Dots” are aligned with
the top of the foam insert.
Note: If the FITLIGHTS™ are not inserted correctly into the Charger Case, the Power Supply will shut off and there will be no power to the
Charger Case until the FITLIGHTS™ are inserted correctly. Interrupted power to the Charger Case is easily determined by removing one
FITLIGHT™ at a time and the remaining FITLIGHTS™ will come on once the misaligned FITLIGHT™ is removed. Reposition the FITLIGHTS™ in the
Charger Case until they are illuminated.
QUICK TIPS TO ENSURE THE FITLIGHTS™ ARE PLACED CORRECTLY.
1.
Make sure the
FITLIGHTS™
are properly centered onto the contacts of the Charger Case.
2.
Should the
FITLIGHTS™
not illuminate, check to make sure that the
FITLIGHT™
is correctly positioned.
3.
As the system is used continuously, the contacts may be pushed out of contact with the
FITLIGHTS™
, they can easily be adjusted by
pulling them forward until contact is made with the
FITLIGHT™
.
4.
Always charge the
FITLIGHTS™
with the Velcro attachment on, as this aligns the
FITLIGHTS™
in the Charger slot.
5.
While charging the
FITLIGHTS™
please ensure the Tablet Controller is turned off
You can also visit the online portal and take a look at the video on how you should correctly insert the
FITLIGHTS™
White dots
Insert the FITLIGHTS™ so that the contacts on the FITLIGHTS™ are properly
aligned with the contacts in the Charger Case.
