FITFIU FITNESS MC-160, Instruction Manual

Page: 52 / 70

52
TROUBLESHOOTING
The following information may assist in identifying a problem and rectifying it.
STORING
FOLDING
Unscrew the safety lock nut on the lower frame and the lock nut on the column, fold the treadmill and pull the spring
knob from the left vertical position and release it to lock the treadmill in the vertical position.
In order not to lose the safety lock, screw the armrest safety lock nut onto the upright column, and screw the upright
position lock nut onto the lower and upper frame.
Problem Cause Solution
Treadmill does not start
The treadmill is not plugged in. Connect the plug to the electrical socket.
The safety key is not correctly
installed.
Reinstall the safety key.
The fuse in the box has tripped.
Wait 5 minutes and then try to restart the
treadmill.
Running surface slips
La superficie no está
suficientemente tensa.
Adjust the running surface tension.
Belt wobbles when
stepped on.
Insufficient lubrication has been
applied to the running surface.
Apply lubricant.
Belt is too tight. Adjust the belt tension.
Belt is not centred.
Belt tension is not even on the rear
roller.
Centre the belt.