1. Components
Part Name
Part No.
S326A
S326S80
Main body
S326A-01
1
-
S326S80-01
-
1
Single fiber adaptor
S326X-18
1
1
Standard waste bin
S326X-12
2
(1 Reserve)
2
(1 Reserve)
Large waste bin
S326X-13
1
1
Hard case
S326X-17
1
1
Hexagonal wrench
S326X-16
1
1
Operating Instructions
FTS-B423
1
1
2. External Description
3. Applicable fiber type
Type
Cleave length
Used holder or adapter
Single fiber
Coating diameter 0.25 or 0.9mm
5 to 20mm
Supplied single fiber adapter, S326X-18
Ribbon fiber
0.25mm pitch 2 to 12 fiber
10mm
Optional ribbon fiber holder
S326S80 is a cutting instrument cleaver designed only for single fiber whose optical fiber
diameter is 80μm.
Please use S326A for regular 125
μ
m single or ribbon fiber cleaving task.
4. Hard Case Handling Instruction
1) Position hard case so that the
“FITEL” inscription is
visible from above.
2) Gently pull the tab upwards to release the lock.
3) Lift the lid open using the other hand.
4) To close the hard case, press the lid down firmly until the
lock clicks into place.
5. Operating instructions
5.1. Cleaving fiber
1) Open both main body and fiber adaptor lids. Place a
prepared fiber (stripped and cleaned) across cleaving
area with fiber end inserted into the waste bin. Ensure
that the stripped fiber is long enough to reach the pinch
roller.
Put fiber to proper v-groove, depending on coating
diameter of optical fiber.
In the case of ribbon fiber cleaving, please use the
ribbon fiber holder (Optional parts).
When using ribbon fiber, check that the fibers are
aligned flatly and no fibers overlap with each other.
Lid
Pinch roller
Waste bin box
Bending pad
fiber adaptor
Lever
fiber adaptor lid
Blade
Pinch
roller lid
