1 Safety Instructions
This manual contains the complete operating and maintenance instructions for S218R-200 Thermal
Stripper. Please review this manual carefully before operating the S218R-200 Thermal Stripper.
The following safety instructions must be observed whenever this product is operated, serviced or
repaired. Failure to comply with any of these instructions or with any precaution or warning contained
in this manual is in direct violation of the standards of the design, the manufacture and the intended
use of the instrument. FURUKAWA ELECTRIC CO.,
LTD. assumes no liability for the customer’s
failure to comply with these requirements.
Safety Instructions
!
WARNING
Failure to comply with any of the instructions, which
are indicated by this symbol, may cause serious
injury or death.
!
CAUTION
Failure to comply with any of the instructions, which
are indicated by this symbol, may cause serious
injury or damage to the AC/DC Power Supply and
other materials.
Please contact FURUKAWA ELECTRIC CO., LTD. with any questions relating to the description of
this manual.
In no case will FURUKAWA ELECTRIC CO., LTD. be liable to the buyer, for any consequential or
indirect damage which is caused by product failure, malfunction, or any other problem.
!
WARNING
• Avoid soaking the AC/DC Power Supply, Battery or Battery recharger with water. Doing so
may cause fire, electrical shock or malfunction.
• Do not use inappropriate input voltage. Doing so may cause fire, electrical shock or
malfunction.
• Do not use any AC/DC Power Supply other than the attached one. Do not use the attached
AC/DC Power Supply as a power supply other than for the S218R-200. Doing so may cause
fire or malfunction.
• Avoid direct skin contact with the heating portion. This may cause burn or injury.
• If smoke, abnormal sounds, extra high temperature or strange smells are observed, power off
and disconnect the S218R-200 from the power source and contact FURUKAWA ELECTRIC
CO., LTD. or your local representative. Continuing to operate under these conditions may
cause fire, electrical shock or malfunction.
• Do not use a damaged power cord with the inner cable is exposed or is severed. Doing so
may cause fire or electrical shock.
• If water spilled into the S218R-200, power off and disconnect the S218R-200 from AC outlet.
Continuing to operate under these conditions may cause fire or electrical shock.
• If the S218R-200 is dropped and damaged, disconnect the power source. Continuing to
operate under these conditions may cause fire or electrical shock.
• Do not operate the S218R-200 at temperatures less than 0ºC or above 40ºC. Do not expose
to high temperatures. Doing so may cause fire, electrical shock or malfunction.
• Do not short-circuit the DC plug. Doing so may cause fire or electrical shock or malfunction.
