Once an invited user has accepted their invite and linked their account with
the scale, they’ll be able to use the scale and have it wirelessly upload to their
Fitbit.com account.
Even with multiple people using the scale, all assigned measurements will be
private unless the user has changed their privacy settings to make them
visible to friends or public. If you’re not sure what your privacy settings are,
you can see them by going to http://www.fitbit.com/user/profile/privacy.
All people who share a scale become Fitbit friends of one another, so if your
weight is shared with friends, other people using the scale will be able to see
your weight when looking at the measurements list:
http://www.fitbit.com/settings/device/scale.
Removing Users
Anyone who is linked to the scale can remove users from their scale via the
device settings page: http://www.fitbit.com/settings/device/scale.
To remove someone, locate the person on the “People” tab, hover over their
name and click the “X” to the right of their name.
Someone who is removed can be easily added back by sending another invite
email.
Assigning a Measurement to Someone Else on the Aria
If two people on a scale are close in weight (+/- 8 lbs), the Aria will prompt you to
select which person is being weighed. Sometimes it might mis-recognize a person in
the event someone’s weight changes drastically. If this happens, you have the option
of reassigning the weight to the correct person.
When the scale is not sure if it’s you or another person it will say “Tap to
Select User”, then “Step Off”. You should then step off the scale and watch the
screen for your user ID/initials. If someone else’s initials appear first, tap the
scale to switch users. When you see your initials, wait, and after a pause it
will assign the measurement to you.
When the scale does not recognize the user, it will display “GUEST” and show
no body fat reading.
To assign an uploaded measurement to the correct person, go to your device
settings page (http://www.fitbit.com/settings/device/scale), and on the
Measurements tab find the weight. From there you can see whom it is
assigned to and move it to someone else’s account.
Once a measurement is assigned, the scale will then flash the person’s initials
at the end of the reading.
Summary of Contents for Aria Wi-Fi Smart Scale
Page 1: ...Aria User Manual ...
