FITBENCH | W1236 Industrial Drive Ixonia, WI 53036 | FITBENCH.COM
ASSEMBLY INSTRUCTIONS and ACCESSORY PLACEMENT
The FITBENCH® YBELL requires no assembly other than placing the YBell® Neo weights and
FITBANDS® in their designated locations. It is recommended that you place the bench in its
desired location before installing the YBell Neos and FITBANDS.
ENGAGING FEET & 3
RD
SWIVEL WHEEL
The FITBENCH products have been designed to move easily throughout the gym floor for
cleaning or changing class environments.
To LOCK the FITBENCH into place:
1. Locate the engaging foot pedals under the rope slot handle on the slam ball storage side
of bench.
2. Using the toe of your shoe, step on one or both of the larger pedals
3. While pressing down with your shoe, pull up (vertically) on the U-mount anchor point
directly above the pedals near the top. You can also use the rope slot handle to pull up.
4. Press down and pull up at the same time until the pedal is locked into place.
5. You will hear them locking into place with a click.
To MOVE the FITBENCH:
1. Simply step down on the smaller pedal on
both sides using the toe of your shoe.
2. Move to location and then follow the steps above.
•
PLEASE NOTE: the FITBENCH 3
rd
wheel was
made to move with ease on rubber, wood, concrete
and other hard surfaces. It was not designed to move
as well on carpet, turf, grass or soft surfaces.
Locking pedals
Unlocking pedals
U-mount
Rope slot
