Fit4Home TF-7102A, User Manual

Page: 14 / 18

14
OPERATING THE COMPUTER
FUNCTIONAL BUTTONS
MODE - Push down for selecting functions. If the long time holds down MODE button
down for resetting time, count and calories.
SET - To set the values of time, count and calories when not in scan mode.
RESET - Push down for resetting time, count and calories.
FUNCTION AND OPERATIONS
1. SCAN: Press “MODE” button until “SCAN” appears, then the monitor will rotate through all the 5 functions : Time,
Count, T. Count, RPM, calories, each display will be hold for 4 seconds.
2. TIME: (1) Count the total time from exercise start to end. (2) Press “MODE” button until “TIME” appears, then
press the “SET” button to set exercise time. When the “SET” is zero, the computer will stop 1 second after the
start of the time
3. COUNT: (1) Accumulate the steps while exercising. (2) Press “MODE” button until “Count” appears, then press
the “SET” button to set exercise Count. When the “SET” is zero, the computer will stop 1 second after the start
of the time.
4. T.COUNT: Display the steps you have exercised
5. DISTANCE: The current status of the traveled distance is displayed.
6. CALORIES: (1) Count the total calories from exercise start to end. (2)Press “MODE” button until “CAL” appears,
Press “SET” button to set exercise calories.
HOW TO INSTALL THE BATTERY:
1. If the display is faint or shows no figures, please replace the batteries.
2. The monitor will automatically shut off if there is no signal received after 4 minutes.
3. The monitor will be auto-powered on when starting to exercise.
4. The monitor will automatically start calculating when you start to exercise and will stop calculating when you
stop exercising for 4 seconds.
FUNCTION
AUTO SCAN Every 4 seconds
TIME 00:00’~99:59’
COUNT 0-9999
T.COUNT 0-9999
CALORIES 0.0~999.9kCAL
DISTANCE 0-9999
BATTERY TYPE 2pcs of SIZE –AAA or UM –4
OPERATING TEMPERATURE 0°C ~ +40°C
STORAGE TEMPERATURE -10°C ~ +60°C