Control Panel
LED Display
Program
Start
Speed -
The emergency
stop switch
Speed +
Stop
Mode
Speed selection area
1. Insert the plug, put the safety key into the control panel, open the power switch, full screen
display 1 second after the beep sound to enter standby.
2. In the manual standby mode initially: SPEED display 0.0
;
TIME display 0:00; DIST display
0.0; PLUSE display 000;
3. In the manual standby mode, press the MODE key, you can respectively selected the mode:
normal,preset time or preset distance. If choose count up timer, display “
:
” flash display; and
count down, display the static status.
A. According to the normal, the time and distance are both count up, when the time to 60 min-
utes, it's stop.
B. According to the preset time, the original time is 30:00, and the speed can be adjusted from
5:00---99:00,and the time count down until 0, the machine stop.
C. According to the preset distance, the original distance is 1.00, you can adjust the speed from
0.50-1.00-1.50---99.5
,
each additional distance is 0.5km, DIST is count down until 0.
4. In the standby mode, click the program key, its P1-P12 auto program for choice, the time will
show by count down, original time is 30
:
00, you can adjust the time from 5:00---99:00 by speed
+/- key.
5. In the standby mode, all of shortcut key are useless, if click the stop key, all will come back to
manual standby status.
6. When running all mode, it must be have 3 seconds count down (speed display), and buzzer
3seconds. In this mode, the mode key and program key is invalid.
7. In manual operation mode, you can adjust the speed from1.0---10.0. original is 1.0,you also
can choose speed (2KM
,
4KM
,
6KM
,
8KM) by speed shortcut key.
8. In automatic mode, the speed button “+/-” and the speed shortcut key are also effective, and
Summary of Contents for JK-04
Page 1: ...Motorized Treadmill JK 04...