2009-3-6 FiT239-C 239-09Y03543
5
hold the screen for about 5 seconds in the system adjustment mode, it will automatically enter the touch screen
calibration menu. The red “+” tag shows alternation in the white screen, follows and touches the five "+" tag. After
setting the machine will automatic return to main manual.
4. Extra
4.1 Calendar: Shows Calendar details
4.2 Calculator
4.3 GUI Test.
4.4 File Download(Caution: if this mode work is activated,
it can only be terminated by cutting off the main power.)
5. Test Record
Using the provided pen to move the”Test Record” and press the”OK” key enter into this mode..
Press the”Back” and“Next” key on LCD or press the “
←
”and “
→
”key to recall all test record. If you need the print
any record only touch the “Print” on the right.
6. Software Update (only suitable for FiT service centre)
Linking the PC with the connecting wire and updating to the new software version. The normal user can’t use this
function. Caution: exit this faction, can’t support the touch faction.
7. Specification
1. LCD
：
TFT
2.4” TFT QVGA display with touch panel
2. Range
：
0.0‰BAC to 5.0‰BAC
，
Accuracy
：
±0.1‰BAC
3. Voltage: 3.7V Li-battery.
4. Temperature Range:
From -10
℃
to +40
℃
, for optimum operation
5. Dimension:
：
128*62*30
（
MM
）
6. Agency approved
：
CE/EMC
8. Calibration:
Does the FiT tester require calibration? Yes. While some ‘novelty’ breathalyzers cannot be recalibrated, serious devices such as the FiT
tester must and can be recalibrated to ensure consistent accuracy. Consumers should be wary of units that cannot be calibrated as their
accuracy will eventually waver.
First innovation Technology
provides a calibration service which can be organized by c852
31780405 or by e-mailing [email protected]
How often should I re-calibrate the FiT tester?
The FiT tester can remain accurate for 6 months of use. The more frequent the use, the more the unit will need to be calibrated.
