INSTRUCTION MANUAL
ULTRACORE FIT 36 V
7
OPERATION
7.1
CHARGING THE BATTERY
7.1.1
CHARGING OPTIONS
The battery can be charged while inserted in the e-bike or after it has been removed. Look in the e-bike manufac-
turer’s original operating instructions to find where the e-bike charging socket is. Connect the charger to the e-bike
charging socket (or directly to the battery) to charge. The charge indicator will automatically appear on the e-bike
display screen if the battery is fitted into the e-bike. The display backlight will go out after a certain period of time.
However, you can press the On-Off button to switch it back on again at any time.
7.2
DISPLAY AND SETTINGS
7.2.1
CHARGE LEVEL CHECK ON BATTERY
1. Checking button for the battery charge level
Lights up the battery charge LEDs to check the remaining battery capacity or a possible fault with the battery
itself.
2. Battery level LEDs
Indicate how much e-bike battery capacity is left. An error code is displayed in the event of a fault. You will find
the error table later in these instructions.
Each lit battery level light represents around 20% of the battery capacity. If the battery is completely discharged, this
is indicated by a rapidly flashing LED.
FIT_Manual_Battery_Ultracore_36V_V1_en | Version 01 | 04.04.2022
11
