Fit N'Fun MA3201, Owner'S Manual And Assembly Instructions, Page: 55 / 67

[PF 3818]
[PF 3819]
[PF 3820]
[PF 3821]
[PF 3822]
[PF 3823]
[PF 3824]
[PF 3825]
[PF 3826]
[PF 3817]
[PF 3816]
Phase 33:
P301 (11) Bridge Spacers
53
\1'' x 5 1/2'' x 29''
\1'' x 5 1/2'' x 28 1/2''
\1'' x 5 1/2'' x 28''
\1'' x 5 1/2'' x 27 1/2''
\1'' x 5 1/2'' x 27''
\1'' x 5 1/2'' x 26 1/2''
\1'' x 5 1/2'' x 26''
\1'' x 5 1/2'' x 25 1/2''
\1'' x 5 1/2'' x 25''
\1'' x 5 1/2'' x 24 1/2''
\1'' x 5 1/2'' x 24''
FIRST
FIRST
Note:Tower and
Rope Rails Removed for
Clarity
Note!
Importa
n
BRIDGE ASSEMBLY
O1 (1) Bridge Cable
Phase Hardware Phase Hardware
STEP 3:
STEP 2:
STEP 1:
51
STEP 4:
Assemble Bridge: Attach Bridge Floor and Spacers:
1. Thread left side of Bridge Floor Boards onto cable as outlined below.
Note: Board lengths get smaller as assembly progresses with the longest
board nearest the tower.
2.
Attach (1) Spacer between each board as shown in
3. Attach (1) Eyelet of Rope Rail over the spacer in between every other
board as shown in
4. Repeat steps 2 & 3 to complete assembly as shown in
5. Pull cable tight to minimize slack.
6. Thread cable through Bridge Platform as shown in
7. Pull Cable tight to minimize slack.
STEP 2.
STEP 3.
STEP 4.
STEP 1.
Note!
Importa
nt
WARNING:
DO NOT ALLOW ANY
CHILDREN ON THE
PLAYSET UNTIL IT IS
ANCHORED
(1) 1 X 5 1/2 X 29 BRIDGE - A -PF3826
(1) 1 X 5 1/2 X 28 1/2 BRIDGE-B - PF3825
(1) 1 X 5 1/2 X 24 BRIDGE-K - PF3816
(1) 1 X 5 1/2 X 25 BRIDGE-I - PF3818
(1) 1 X 5 1/2 X 24 1/2 BRIDGE-J - PF3817
(1) 1 X 5 1/2 X 25 1/2 BRIDGE-H - PF3819
(1) 1 X 5 1/2 X 26 BRIDGE-G - PF3820
(1) 1 X 5 1/2 X 26 1/2 BRIDGE-F - PF3821
(1) 1 X 5 1/2 X 27 1/2 BRIDGE-D - PF3823
(1) 1 X 5 1/2 X 27 BRIDGE-E - PF3822
(1) 1 X 5 1/2 X 28 BRIDGE-C - PF3824