VPP500 Vacuum Pickup System Operating Manual
© 2020 Fisnar
- 9 -
VPP500 Rev 01
EXTERNAL CONTROLS
FIG. 3: External Controls - Back
1.
Foot Switch
Connector
The foot pedal switch (#5601888) is connected here. Or it can be used
for connecting to an external device (e.g. Fisnar dispense robot) that
will send the start signal to the machine.
2.
Power Input
Connector
Power input cable from the external power supply (#5601911) is
connected here.
3.
On / Off Switch
Used to switch the machine on or off.
4.
ESD Grounding
Point
ESD grounding cable (#5601947) is connected here. The other end of
the cable is to be connected to a suitable common ESD Safe grounding
point within the workplace environment.
5.
Exhaust
When the machine is in use, air will be exhausted from this connector.
A muffler (#560024) can be fitted into the exhaust outlet port to reduce
the emitted noise of the exhausted air.
6.
Air In Push
Connector
External Compressed air 70-100 psi (5-7 bar) is to be connected here,
using the supplied ¼” OD air inlet hose.
5
3
6
1
2
4
