F1300N Rotary Table Operating Manual
Section 2: Setup
Rev A, February 2018
© 2017 Fisnar Inc. l Website:
www.fisnar.com
l E-mail:
6
1
Safety Precautions
1.1 In order to meet the requirements of the European Community (CE) safety
directives, the rotary table must be placed in an enclosure supplied by Fisnar Inc.
distributors. The enclosure will prevent the operator from entering the rotary table work
area and will generate an emergency stop signal if the enclosure’s door switch is opened
while the rotary table is running.
1.2 Make sure the rotary table and accessories are connected to a properly grounded power
source.
1.3 Do not drop or spill foreign objects or material such as screws or liquids into the rotary
table.
1.4 Do not touch any moving parts while the rotary table is running.
1.5 Loading and unloading of parts and material must be done when the rotary table is not
running.
1.6 Changing of fixtures or tooling must be done with the power source disconnected.
1.7 The F1300N Rotary Table should only be operated in an environment of 0 to 40 degrees
centigrade and humidity of 20 to 95 percent with no condensation.
1.8 Do not store or install the rotary table in an area where it is exposed to direct sunlight.
1.9 Do not operate the rotary table where electrical noise is present.
1.10 Only use a neutral detergent for cleaning. Do not use alcohol, benzene or thinner.
