Recommended Levels
ITEM
LEVEL
Sanitiser (Chlorine)
2.0 3.0 ppm
Total Alkalinity
90 110 ppm
pH Level
7.4 7.6
It is important to note that if the right pH and sanitiser levels are maintained,
viruses and bacteria should not survive in the water. In terms of general hygiene,
it is important to keep the filter and pump clean. Clean the filter regularly and
where ever possible always shower before spa use.
PUMP MAINTENANCE
The pumps in your spa are high performance motors that require regular
checking. It is a requirement of your spas warranty to check the pumps every
four (4) months for signs of leaking or corrosion.
Any sign of leaking or calcium build up at the bottom of the pump between
the plastic wet end and metal part of the motor indicates that the seals of your
pumps are worn and need replacing. It is recommended that you contact your
local spa dealer to arrange a service of your pump before the motor develops
further problems.
Pump seal corrosion and wear is generally caused by incorrect pH and alkalinity
levels within the spa, or heavy use /excessive dosage of sanitisers such as
Chlorine or Bromine. In order to avoid problems, please follow the water
chemistry instructions provided to you by your dealer.
