background image

  A SUBSIDIARY OF DOUGLAS DYNAMICS, L.L.C.

Fisher Engineering

February 15, 2010

Lit. No. 48685, Rev. 00

50 Gordon Drive, Rockland, Maine  04841-2139 • www.

fi

 sherplows.com

49900

CONTROL KIT

XLS™ and XtremeV™ Joystick Control with 

SECURITY GUARD™ Snowplow Anti-Theft System

OPERATING INSTRUCTIONS

L

R

RAISE

LOWER

ON/OFF

FLOAT

SCOOP

RETRACT

U.S. PAT. 4,999,935

3
WING
IN/OUT

4

WING

IN/OUT

2

1

SECURITY GUARD System Enabled Controls Have

Numbers 1 Through 4 on the Faceplate.

CONTROL OVERVIEW

The SECURITY GUARD feature was developed as an 
electrical anti-theft system for snowplows. The system 
provides a deterrent from theft and/or non-permitted 
use by allowing you to electronically lock the 
snowplow's hydraulic functions.

To use this function, you must complete the 
"Activation" process.

Each control is equipped with an ON/OFF switch and 
an indicator light to show when the control is powered 
ON or OFF. The controls are powered by the vehicle's 
battery, so your vehicle ignition (key) switch must be 
ON to use the controls.

Before Activating the SECURITY GUARD 
System:

Install the control as stated in the Joystick Control Kit 
Installation Instructions, and check all plow functions 
as described below.

OPERATING INSTRUCTIONS

1.  Turn the vehicle ignition switch to the ON or the 

ACCESSORY position.

2.  Move the slide switch on the side of the control to 

the "ON" position. The control indicator light glows 
red, indicating the control is ON. The indicator light 
glows red whenever the control and the vehicle 
ignition switch are both ON and the electrical 
connections to the plow are completed.

The ON/OFF switch operates as an emergency stop if 
required.

 WARNING

To prevent accidental movement of the 
blade, always turn the ON/OFF switch to OFF 
whenever the snowplow is not in use. The 
control indicator light will turn off.

L

R

RAISE

LOWER

ON/OFF

FLOAT

SCOOP

RETRACT

U.S. PAT. 4,999,935

3
WING
IN/OUT

4

WING

IN/OUT

2

1

Power 
Indicator 
Light (red)

Float 
Light
(green)

ON/OFF

Switch

(Emergency

Stop)

Summary of Contents for SECURITY GUARD XLS

Page 1: ...r OFF The controls are powered by the vehicle s battery so your vehicle ignition key switch must be ON to use the controls Before Activating the SECURITY GUARD System Install the control as stated in the Joystick Control Kit Installation Instructions and check all plow functions as described below OPERATING INSTRUCTIONS 1 Turn the vehicle ignition switch to the ON or the ACCESSORY position 2 Move ...

Page 2: ...rol lever must be moved back to the center position before selection the desired function Whenever the lever is released it should spring back into the center position to stop any blade movement L R RAISE LOWER ON OFF FLOAT SCOOP RETRACT U S PAT 4 999 935 2 1 3 WING IN OUT 4 WING IN OUT Float Light green Function Description of Operation RAISE Move control lever toward top of control body to raise...

Page 3: ... is ready to accept your 4 digit security code Enter your 4 digit security code by moving the control lever into the position of any of the eight following positions UP DOWN LEFT RIGHT 1 2 3 or 4 Once you have entered your 4 digit security code the FLOAT light will stop flashing and the POWER light will turn OFF This indicates that your 4 digit security code is entered and stored in the SECURITY G...

Page 4: ...ter the security code before the snowplow can be activated Once the security code is established the SECURITY GUARD system recognizes that a control with the same security code is attached and does not require a manual unlock to activate the snowplow The system will recognize the control as safe and will automatically unlock In the event that a snowplow is locked and cannot be manually unlocked or...

Reviews: