Instruction Manual
D101299X012
RSS Valve
July 2017
12
Figure 9. Dimensions and Weights
ANSI/ISA CL150 FACE‐TO‐FACE DIMENSIONS
MATING WITH CL150 FLANGES
Valve
Size
Dimensions
Approximate
Weight
A
B
D
E
O
NPS
mm
kg
1
1‐1/2
2
3
4
184.0
222.0
254.0
298.0
350.0
83.0
97.0
107.0
121.0
176.0
185.0
225.0
230.0
340.0
350.0
108.0
127.0
152.4
190.5
220.0
10
17
20
39
42
NPS
Inches
Pounds
1
1‐1/2
2
3
4
7.25
8.75
10.00
11.75
13.78
3.27
3.82
4.21
4.76
6.94
7.28
8.86
9.06
13.39
13.78
4.25
5.00
6.00
7.50
8.66
23
36
43
86
92
ANSI/ISA CL300 FACE‐TO‐FACE DIMENSIONS
MATING WITH CL300 FLANGES
Valve
Size
Dimensions
Approximate
Weight
A
B
D
E
O
NPS
mm
kg
1
1‐1/2
2
197.0
235.0
267.0
90.0
101.0
115.0
185.0
225.0
230.0
123.8
156.0
165.0
11
18
20
NPS
Inches
Pounds
1
1‐1/2
2
7.75
9.25
10.50
3.54
3.97
4.53
7.28
8.86
9.06
4.87
6.14
6.50
25
40
45
MATCH LINE
FOR ACTUATOR
10B4744-G
A5216‐1
D
B
A
E
4
Assembly
CAUTION
To avoid damage to the seat ring sealing surface and/or threads in the valve body liner, make or order the seat ring tool
shown in figures 7 and 8. Installing the seat ring using other tools might cause permanent damage to the seat ring sealing
surface and/or threads allowing excessive leakage of the valve.
1. Install the seat ring (key 4) with the seat ring tool (figure 7 or 8) that can be ordered from the Parts List or made
according to the dimensions in table 3 and figure 8. Tighten the seat ring until contact is felt between the sealing
ledge of the seat ring and its mating surface in the valve (figure 5). At this point, tighten the seat ring one quarter
turn or to the torque values listed in table 4.
2. To install the valve plug (key 3), screw the valve plug onto the bellows and insert the locking rope with pliers (figure
6).
3. Install the assembled valve plug, bellows, and valve stem (keys 3, 6, and 5). For metal bellows, install the gasket
(key 27).
4. Install the bonnet according to steps 9 and 10 of the Replacing Packing and Bushing Inserts procedure.
5. Tighten the packing follower (key 11) to 1.13 N
S
m (10 lbf
S
in) of torque to ensure the packing rings are seated. After
the packing rings are seated loosen the packing follower one half turn.