6
or identify targets.
3.
PINPOINT/DEPTH READING:
A three purpose, spring
loaded push-button. When pushed and held, the
CZ-3D goes into a no-motion, all-metal mode for
precise pinpointing and approximate depth reading
of coin-sized targets. This button is also used in
conjunction with the GROUND control during the
ground balancing procedure.
4.
SENSITIVITY/BATT TEST:
In the extreme counter-
clockwise position, the battery condition is checked
as indicated by a strong or weak tone and a meter
reading. When rotated clockwise, sensitivity to targets
(as well as ground mineralization and electrical
interference) is increased. When in the AUTOTUNE
mode, this control also acts as a “threshold tone”
control.
5.
HEADPHONES:
This connector accepts most stereo
headphones.
6.
MODE:
ENHANCE position for dry land or shallow fresh
water hunting. SALT position for wet-sand ocean
beaches or hunting in shallow surf.
7.
VOLUME/OFF:
Power on-off and volume control.
Volume is gradually increased from 1 to 5 settings. From
5 to 10, loud target response is held constant while faint
targets continue to get louder (audio boost).
CONTROL PANEL
Figure 3,
CONTROL PANEL
1
2
3
4
5
6
7
