CONTROL PANEL
6
The Coin Strike control panel is an all new digital I/O System. The
LCD Display provides you with a constant control readout showing
you all of your current settings, much like the knobs of an older
-style metal detector.
1. The POWER button turns the unit ON and OFF. One of the first
things you will notice when you turn on your Coin Strike is the battery
level display. Fresh batteries will show 9 volts; when the battery
level is down to 6 volts, you have about an hour of battery life
left. The detector will not turn on if the search coil is not properly
connected. This can prove to be a timesaving safeguard.
2. The LIGHT button enables you to use your back light for hunting
in dim light situations.
3. The MENU button enables you to enter the “menu mode”, in
which you can adjust any of seven controls with the UP/DOWN
arrow buttons: the iron discrimination level, the threshold level,
the sensitivity level, a wet sand “salt” mode, the volume level, four
independent disc. notches, and the saving or recall of 4 control
setups (including a factory preset mode) with our memory feature.
Notice that when the MENU button is pushed, the active control
blinks — this is the control that can be adjusted with the UP or
DOWN arrow buttons. To move to the next control, just press the
MENU button again. When you have all your settings completed,
press the P/P (MEM) button to return to the search mode.
TRACK
AUTO
GROUND
P/P
MEM
ALL
METAL
DISC
MENU
LIGHT
M-
SCOPE
POWER
HEADPHONES
OO
DISC
SENS
THRESH
VOLUME
DISC
0
2
4
6
8
10
0
2
4
6
8
10
0
2
4
6
8
10
0
2
4
6
8
10
FOIL
NICKEL
TABS
ZINC
Summary of Contents for M-Scope COIN STRIKE
Page 27: ......
