8
、
Changing batteries and notices
1
、
Slightly to press the place with
along
the arrowhead direction to push the back cover of
remote controller.(As show in Fig 8.1.)
Fig 8.1
2
、
Take out the old batteries ,insert two AAA
alkaline cells(As show in Fig 8.2.)
3
、
Attach the back cover of remote control.
Fig 8.2
NOTE:
●
When changing the batteries, do not use the old or different batteries, otherwise, it can cause the
malfunction of the wireless remote control.
●
If the wireless remote control will not be used for a long time, please take them out . and do not let
the leakage liquid damage the wireless remote control .
●
The operation should be in its receiving rang.
●
It should be placed where is 1m away from the TV set or stereo sound sets.
●
If the remote control cannot operate normally, please take the batteries out, and then reinsert it 30s
later; if it is also abnormal, please replace the batteries.
●
If the main unit needs to be remote controlled, please aim remote controller at the receiver of main
unit in order to improve the receiving sensitivity of the main unit.
●
When the remote controller sends out single, a make
will flicker for about 1s.The bell will ring if
the main unit receives effect signal.
●
“
*
”
There is no this function for th
is
unit
