25
5
、
button
*
There is no this function for this unit. If press this key, the main unit will click, but it also runs under
original status.
6
、
button
*
There is no this function for this unit. If press this key, the main unit will click, but it also runs under
original status.
7
、
“SLEEP” button
Press this button to set the sleep mode. Once the sleep mode is set , the temperature will increase
1
℃
after 1 hour, and still increase another 1
℃
after 2 hours in the COOL mode. While in HEAT mode ,
the temperature will decrease 1
℃
after 1 hour, and still decrease another 1
℃
after 2 hours .
8
、
“TIMER” button
Press the button to set the timing function. When the timing function is on, press this button to
cancel the function. When the timing function is off, press this button once, words Hour on(off) will
appear and flicker. In this case, press +/- button to adjust time (press +/- button continuously to change
timing value quickly),the setting time range is from 0.5 to 24 hr; press this key once again to fix the time,
then remote controller will send out the signal immediately and hour on/off will stop flickering. If the time
of that no press timer button under filcking status is above 5s, the timer setting will quit. If the timer has
been set, press this button once again to quit it.
9
、
“TURBO” button
Set turbo on or off(the characters of turbo will appear of disappear) by pressing this key under
cooling or heating mode. Once energized, the unit will be defalted to be turbo off. This function can not
be set under auto, dehumidify or fan mode, and characters of turbo won’t appear.
10
、
“BLOW” button
Set Blow on or off (the characters of Blow will appear of disappear) by pressing this key under
cooling or dehumidify mode. Once energized, the unit will be defaulted to be Blow off. Set E-Heater on
or off (the characters of E-Heater will appear of disappear) by pressing this key under heat mode. Once
energized, the unit will be defalted to be E-Heater off. Blow and E-Heater function can not be set under
auto or fan mode, and characters of Blow won’t appear.
11
、
“Light” button
*
There is no this function for this unit. If press this key, the main unit will click, but it also runs under
original status.
12
、
“Temp” button
*
There is no this function for this unit. If press this key, the main unit will click, but it also runs under
original status.
13
、
“HEALTH |SAVE” button
*
There is no this function for this unit. If press this key, the main unit will click, but it also runs under
original status.
