Fisher EZR Instruction Manual Download Page 40

Page: 40 / 40

The Emerson logo is a trademark and service mark of Emerson Electric Co. All other marks are the property of their prospective owners. Fisher is a mark owned by Fisher Controls, Inc., a

business of Emerson Process Management.

The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to be construed as warranties or

guarantees, express or implied, regarding the products or services described herein or their use or applicability. We reserve the right to modify or improve the designs or specifications of such

products at any time without notice.

Emerson Process Management does not assume responsibility for the selection, use or maintenance of any product. Responsibility for proper selection, use and maintenance of any Emerson

Process Management product remains solely with the purchaser.

Industrial Regulators

Emerson Process Management

Regulator Technologies, Inc.

USA - Headquarters

McKinney, Texas 75069-1872 USA

Tel: 1-800-558-5853

Outside U.S. 1-972-548-3574
Asia-Pacific

Shanghai, China 201206

Tel: +86 21 2892 9000
Europe

Bologna, Italy 40013

Tel: +39 051 4190611
Middle East and Africa

Dubai, United Arab Emirates

Tel: +971 4811 8100

Natural Gas Technologies

Emerson Process Management

Regulator Technologies, Inc.

USA - Headquarters

McKinney, Texas 75069-1872 USA

Tel: 1-800-558-5853

Outside U.S. 1-972-548-3574
Asia-Pacific

Singapore, Singapore 128461

Tel: +65 6777 8211
Europe

Bologna, Italy 40013

Tel: +39 051 4190611

Gallardon, France 28320

Tel: +33 (0)2 37 33 47 00

TESCOM

Emerson Process Management

Tescom Corporation

USA - Headquarters

Elk River, Minnesota 55330-2445 USA

Tel: 1-763-241-3238
Europe

Selmsdorf, Germany 23923

Tel: +49 (0) 38823 31 0

For further information visit www.fisherregulators.com

Type EZR

PRX Series Pilots (Figure 27)

Key Description

Part Number

Parts Kits

Elastomer Parts Kits (includes keys: 4, 5, 14, 17,

18, 25, and 28)

Types PRX/120 and PRX/125

Nitrile (NBR)

RPRX00X0N12

Fluorocarbon (FKM)

RPRX00X0F12

Types PRX/120-AP and PRX/125-AP

Nitrile (NBR)

RPRXAPX0N12

Fluorocarbon (FKM)

RPRXAPX0F12

Adjusting Screw

GD25334X012

Locknut

GD03600X012

Cap

GD25335X012

4* Upper Cover O-ring

See Parts Kits

5* O-ring

See Parts Kits

Spring Carrier Plate

GD25336X012

Spring

See Table 2

Upper Cover

GD29854X012

Spring Carrier Plate

GD25338X012

10 Machine Screw

M5011018X12

11 Washer

GD05500X012

12 Filter

GD50036X012

13 Upper Diaphragm Plate

GD25339X012

14* Diaphragm

See Parts Kits

15 Lower Diaphragm Plate

GD25341X012

16 Body

GD25331X012

*Recommended Spare Part

Key Description

Part Number

17* Orifice O-ring

See Parts Kits

18* Lower Cover O-ring

See Parts Kits

19 Orifice

GD25344X012

20 Nut

GD00200X012

21 Lower Cover

GD29860X012

22* Pad Holder

Nitrile (NBR)

GD25340X012

Fluorocarbon (FKM)

M0279950X12

23 Stem

GD25343X012

24 Nameplate

- - - - - - - - - - -

25* Stem O-ring

See Parts Kits

26 Upper Diaphragm Nut

GD02800X012

27 Damper Adjusting Screw with Hole

GD25348X012

28* Restrictor/Damper O-ring

See Parts Kits

29 Plate

GD25440X012

29 Damper/Restrictor Plate

Types PRX/120 and PRX/120-AP

GD25440X012

Types PRX/125 and PRX/125-AP

GD25793X012

30 Ring Nut

GD25349X012

31 Nameplate Screw

GD06100X012

32 Restrictor Adjusting Screw with Hole

GD25348X012

33 Plug (Types PRX/125 and PRX/125-AP Only)

GD25792X012

34 Plug (Types PRX/125 and PRX/125-AP Only)

GD50032X012

35 Spring Barrel Extension for AP

GD27410X012

Summary of Contents for EZR









































Search results

Summary of Contents for EZR

Reviews:

Related manuals for EZR

Brands by name

Popular brands

Fisher EZR, Instruction Manual

Search results

Summary of Contents for EZR

Reviews:

Related manuals for EZR

Brands by name

Popular brands