manualshive.com logo in svg

Fisher EHD series, Instruction Manual, Page: 6 / 32

Share
Download
Fisher EHD series Instruction Manual Download Page 6

Instruction Manual

D100392X012

EH Valves NPS 8 through 14

June 2017

6

8.  After all maintenance is complete, refer to the Trim Replacement procedure to assemble the valve body.

Note

If the valve has ENVIRO‐SEAL™ live‐loaded packing installed, see the Fisher instruction manual titled ENVIRO‐SEAL Packing System
for Sliding‐Stem Valves (

D101642X012

) for packing instructions.

If the valve has HIGH‐SEAL live‐loaded packing installed, see the Fisher instruction manual titled HIGH‐SEAL Live‐Loaded Packing
System (

D101453X012

) for instructions.

Figure 2. Lubricator and Lubricator/Isolating Valve

LUBRICATOR

LUBRICATOR/ISOLATING VALVE

10A9421‐A
AJ5428‐D
A0832‐2

14

14

27

Packing Lubrication

  WARNING

To avoid personal injury or property damage resulting from fire or explosion, do not lubricate packing used in oxygen
service or in processes with temperatures over 260

_

C (500

_

F).

CAUTION

Do not lubricate graphite packing. Graphite packing is self-lubricated. Additional lubrication may result in slip-stick
movement of the valve.

Note

ENVIRO‐SEAL or HIGH‐SEAL packing does not require lubrication.

Summary of Contents for EHD series

































Reviews:

No comments