manualshive.com logo in svg

Fisher EHD series, Instruction Manual, Page: 23 / 32

Share
Download
Fisher EHD series Instruction Manual Download Page 23

Instruction Manual

D100392X012

EH Valves NPS 8 through 14

June 2017

23

Parts Kits

ENVIRO‐SEAL Packing Retrofit Kits

Retrofit kits include parts to convert existing packing to the ENVIRO‐SEAL packing system. PTFE kits include keys 200,
201, 211, 212, 214, 215, 217, 218, tag, and cable tie. Graphite kits include keys 200, 201, 207, 208, 209, 210, 211,
212, 214, 216, 217, tag, and cable tie. Duplex kits include keys 200, 201, 207, 209, 211, 212, 214, 215, 216, 217, tag,
and cable tie. Stems and packing box constructions that do not meet Emerson stem finish specifications, dimensional
tolerances, and design specifications, may adversely alter the performance of the packing kit.

Stem Diameter

mm (Inches)

Yoke Boss Diameter

mm (Inches)

Kits

Packing Material

Double PTFE

Graphite ULF

Duplex

31.8 (1‐1/4)

127 (5, 5H)

RPACKXRT052

RPACKXRT302

RPACKXRT252

ENVIRO‐SEAL Packing Repair Kits

Repair kits include parts to replace the “soft” packing materials in valves that already have ENVIRO‐SEAL packing
arrangements installed or in valves that have been upgraded with ENVIRO‐SEAL retrofit kits. PTFE repair kits include
keys 214, 215, and 218. Graphite repair kits include keys 207, 208, 209, 210, and 214. Duplex repair kits include keys
207, 209, 214, and 215.

Stem Diameter

mm (Inches)

Yoke Boss Diameter

mm (Inches)

Kits

Packing Material

Double PTFE

Graphite ULF

Duplex

31.8 (1‐1/4)

127 (5, 5H)

RPACKX00232

RPACKX00632

RPACKX00332

Summary of Contents for EHD series

































Reviews:

No comments