manualshive.com logo in svg

Fisher Design EAD series, Instruction Manual, Page: 22 / 40

Share
Download
Fisher Design EAD series Instruction Manual Download Page 22

Design ED & EAD Class 125-600

22

ENVIRO-SEAL Packing Retrofit Kits

Retrofit kits include parts to convert valves with
existing standard bonnets to the ENVIRO-SEAL
packing box construction. Refer to figure 15 for key
numbers for PTFE packing, figure 16 for key numbers
for graphite packing, and figure 17 for key numbers for
duplex packing. PTFE kits include keys 200, 201, 211,
212, 214, 215, 217, 218, tag, and cable tie. Graphite
kits include keys 200, 201, 207,208, 209, 210, 211,
212, 214, 216, 217, tag, and cable tie. Duplex kits

include keys 200, 201, 207, 209, 211, 212, 214, 215,
216, 217, tag, and cable tie.

Stems and packing box constructions that do not meet
Fisher stem finish specifications, dimensional
tolerances, and design specifications, may adversely
alter the performance of this packing kit.

For part numbers of individual components, refer to
instruction manual ENVIRO-SEAL Packing System for
Sliding-Stem Valves, Form 5306.

ENVIRO-SEAL Packing Retrofit Kits

PACKING

STEM DIAMETER AND YOKE BOSS DIAMETER, mm (INCH)

PACKING

MATERIAL

9.5 (3/8)

54 (2-1/8)

12.7 (1/2)

71 (2-13/16)

19.1 (3/4)

90 (3-9/16)

25.4 (1)

127 (5)

31.8 (1-1/4)

127 (5, 5H)

Double PTFE

RPACKXRT012

RPACKXRT022

RPACKXRT032

RPACKXRT042

RPACKXRT052

Single Graphite

RPACKXRT062

RPACKXRT072

RPACKXRT082

RPACKXRT092

RPACKXRT102

Duplex

RPACKXRT212

RPACKXRT222

RPACKXRT232

RPACKXRT242

RPACKXRT252

ENVIRO-SEAL Packing Repair Kits

Repair kits include parts to replace the ‘‘soft’’ packing
materials in valves that already have ENVIRO-SEAL
packing arrangements installed or in valves that have
been upgraded with ENVIRO-SEAL retrofit kits. Refer
to figure 15 for key numbers for PTFE packing, figure
16 for key numbers for graphite packing, and figure 17
for key numbers for duplex packing. PTFE repair kits
include keys 214, 215, and 218. Graphite repair kits

include keys 207, 208, 209, 210, and 214. Duplex
repair kits include keys 207, 209, 214, and 215.

Stems and packing box constructions that do not meet
Fisher stem finish specifications, dimensional
tolerances, and design specifications, may adversely
alter the performance of this packing kit.

For part numbers of individual components, refer to
instruction manual ENVIRO-SEAL Packing System for
Sliding-Stem Valves, Form 5306.

ENVIRO-SEAL Packing Repair Kits

PACKING

STEM DIAMETER AND YOKE BOSS DIAMETER, mm (INCH)

PACKING

MATERIAL

9.5 (3/8)

54 (2-1/8)

12.7 (1/2)

71 (2-13/16)

19.1 (3/4)

90 (3-9/16)

25.4 (1)

127 (5)

31.8 (1-1/4)

127 (5, 5H)

Double PTFE (contains keys 214, 215, & 218)

RPACKX00192

RPACKX00202

RPACKX00212

RPACKX00222

RPACKX00232

Single Graphite (contains keys 207, 208, 209, 210, and 214)

RPACKX00242

RPACKX00252

RPACKX00262

RPACKX00272

RPACKX00282

Duplex (contains keys 207, 209, 214, and 215)

RPACKX00292

RPACKX00302

RPACKX00312

RPACKX00322

RPACKX00332

Parts List

Note

Most part numbers appear in tables
following the individual key-numbered
listings.

Bonnet (figure 18)

Key

Description

Part Number

1

Bonnet

If you need a bonnet and/or an ENVIRO-SEAL

bellows seal bonnet as a replacement
part, order by valve size and stem
diameter, serial number, and desired
material.

2

Extension Bonnet Baffle

3

Packing Flange

3

ENVIRO-SEAL bellows seal packing flange

Key

Description

Part Number

4

Packing Flange Stud

4

ENVIRO-SEAL bellows seal stud bolt

5

Packing Flange Nut

5

ENVIRO-SEAL bellows seal packing flange nut

6*

Packing set, PTFE

See following table

6*

ENVIRO-SEAL bellows seal packing set

PTFE (1 req’d for single, 2 req’d for

double)

9.5 mm (3/8-inch) stem

12A9016X012

Size 2 w/ 12.7 mm (1/2-inch) stem

12A9016X012

Sizes 3 & 4 w/ 12.7 mm (1/2-inch) stem

(For double PTFE only)(2 req’d)

12A8832X012

7*

Packing Ring, PTFE

See following table

7*

ENVIRO-SEAL bellows seal packing ring

Double packing graphite filament

(4 req’d)

9.5 mm (3/8-inch) stem

1P3905X0172

Size 2 w/ 12.7 mm (1/2-inch) stem

1P3905X0172

Sizes 3 & 4 w/ 12.7 mm (1/2-inch) stem

14A0915X042

*Recommended spare parts

Summary of Contents for Design EAD series









































Reviews:

No comments