manualshive.com logo in svg

Fisher Design EAD series, Instruction Manual, Page: 18 / 40

Share
Download
Fisher Design EAD series Instruction Manual Download Page 18

Design ED & EAD Class 125-600

18

Figure 12. PTFE Packing Arrangement for Use in ENVIRO-SEAL Bellows Seal Bonnets

UPPER WIPER
(KEY 12)

MALE ADAPTOR

PACKING RING

FEMALE ADAPTOR

SPACER
(KEY 8)

SPACER (KEY 8)

SPACER (KEY 8)

12B4182-A

12B4185-A SHT 1

12B4182-A SHT 2

12B4185-A SHT 2

A5885 / IL

THRUST
RING (KEY 39)
SPRING
(KEY 8)

THRUST
RING
(KEY 39)

BUSHING 
(KEY 13)

PACKING SET
(KEY 6)

9.5 mm

(3/8ĆINCH) STEM

12.7 mm

(1/2ĆINCH)

STEM

9.5 mm

(3/8ĆINCH)

STEM

12.7 mm

(1/2ĆINCH)

STEM

FOR S31603 (316 SST) PACKING

BOX PARTS

FOR ALL PACKING BOX MATERIALS

EXCEPT S31603

SINGLE ARRANGEMENTS

UPPER WIPER
(KEY 12)

MALE ADAPTOR

PACKING RING

FEMALE ADAPTOR

SPACER (KEY 8)

BUSHING 
(KEY 13)

PACKING SET
(KEY 6)

BUSHING 
(KEY 13)

SPACER
(KEY 8)

BUSHING 
(KEY 13)

THRUST
RING
(KEY 39)

9.5 mm

(3/8ĆINCH)

STEM

12.7 mm

(1/2ĆINCH)

STEM, 2ĆINCH

VALVES

12.7 mm

(1/2ĆINCH)

STEM, 3Ć AND 4ĆINCH

VALVES

DOUBLE ARRANGEMENTS

12B4183-A

18A0906-C

18A5338-A

A5886 / IL

Note

The ENVIRO-SEAL stem/bellows
assembly for Design E valves is
available only with a threaded and
pinned plug/adaptor/stem connection.
The existing valve plug can be reused
with the new stem/bellows assembly or a
new plug can be installed. If the existing
valve plug is reused, and the adaptor is
in good condition, it may be reused also.
However, never reuse an old adaptor

with a new valve plug. Using an old
adaptor with a new valve plug requires
drilling a new pin hole in the adaptor.
This drilling weakens the adaptor and
may cause failure in service. However, a
used valve plug may be reused with a
new adaptor.

3.  Inspect the existing valve plug and adaptor. If they
are in good condition, they can be reused with the new
stem/bellows assembly and they do not need to be
separated.

Summary of Contents for Design EAD series









































Reviews:

No comments