background image

6

FILTER

The XLT-17 has four different filtering modes.

 

AL (All Frequencies) –  This is the No Filter feature of the XLT-17.  No 

modifications to the audio can be made with the arrow keys.  Frequency 
range of the All Frequency setting is from 60 Hz to 6 kHz. This mode is often 
used to begin to listen for the leak noise. 

(The following filter modes are often used to pinpoint the location of the 
leak noise.)

 

HI (High Range) – This filtering mode allows the user to adjust the 

response in the higher areas of the frequency range.  Use the arrow keys 
to increase or decrease this frequency response range.

 

LO (Low Range) – Similar to the previous filter mode, the lowpass 

filter allows the user to listen to the lower areas of the frequency range.  
The arrow keys are used to increase or decrease this frequency response 
range.

 

FC (Frequency Choice) –  This filter could also be called Frequency 

Select.  This mode allows tuning to the frequency that gives the user the 
best audio response to the leak noise.  The arrow keys are used to move 
the cursor, selecting a narrow frequency band of choice.

CONTROL PANEL

 

 

 

 

 

 

 

 

  

 

 

 

 

   

 

 

   

 

 

 

 

 

 

   

 

 

 

   

 

 

 

 

 

 

 

 

 

   

 

 

 

  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  

 

 

 

 

 

 

 

   

 

    

 

 

   

 

 

 

 

 

 

  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

   

 

   

   

 

 

 

 

 

   

 

 

 

  

 

 

 

 

 

   

 

 

  

 

 

 

   

   

 

 

  

 

 

 

 

 

 

 

     

 

 

 

 

 

 

 

 

 

 

 

 

 

   

 

 

   

 

 

 

 

 

 

 

 

 

 

   

 

 

   

 

   

 

   

   

 

  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

   

 

 

 

 

   

 

   

 

 

 

 

 

 

 

 

 

   

 

 

 

 

 

  

 

 

 

 

 

   

 

 

 

 

 

   

 

 

 

 

 

 

 

 

 

 

   

 

   

 

 

 

 

 

 

 

 

   

 

  

 

 

 

 

   

 

 

 

 

   

 

 

 

     

 

Summary of Contents for XLT-17













Reviews: