27
DETECTOR CARE
(Continued)
Coil Knob Assembly
Disassemble in well-lit environment.
Coil-Knob-Assembly Parts:
2.. oil-Retaining-Nut
Assemble the Pieces Together:
1
. The
Screw
fits into the
Coil-Retaining-Nut
to form
a
Coil-Knob-Assembly
.
2.
After the fork is aligned over
the coil ears, the
Hex Insert
is
pushed through the holes on
each side of the fork (from inside
to outside) to hold the fork of
the shaft to the coil.
3.
Finally, the
Coil-Knob-Assembly
screws into the installed
Hex Insert
.
CAUTION:
You must hold the head of the
Screw
in with your finger
while screwing the
Coil-Knob-Assembly
into place.
1. crew
Figure 13
Figure 14
3..
x Insert
Figure 15
Figure 16
Figure 17
Figure 18
