background image

•  While holding the pedal hubs on the pedal axle assembly, 

insert the pedal axle through the hole in the center of the 

front wheel.

•  Push the pedal hubs into the center of the front wheel until 

they are flush with the surface of the front wheel.

Pedal Axle  

Assembly

Pedal Hubs

Front Wheel

•  Fit the pedal on the pedal axle. Tap the pedal with  

a hammer until it is secure.

•  Pull the pedal up to be sure it is secure. If you can remove 

it, you have not secured it properly. Tap it with the 

hammer again.

Pedal Axle

Scrap Block  

of Wood

Pedal

Pedal Hub

Pedal Hub

•  Turn the front wheel assembly over.
•  Insert the remaining pedal hubs on top of and below the 

pedal axle and into the hole in the center of the front wheel.

•  Push the pedal hubs into the center of the front wheel until 

they are flush with the surface of the front wheel.

•  Place the front wheel assembly between the fork arms. 

Make sure the pedal axle fits into the groove at the bottom 

of each fork arm.

•  Place a fork cover over the pedal axle on one fork arm. 
•  Insert two #8 x 

3

/

4

" (1,9 cm) screws into the fork cover  

and tighten.

•  Repeat this procedure to attach the other fork cover to the 

other fork arm.

Fork Arms

Pedal Axle

Groove

Fork Cover

Assembly

4

5

6

7

8

Summary of Contents for W9981









Reviews: