4
Assembly
Hub
• Fit a hub into the center of the rear wheel.
• Insert a screw into the center of the hub and tighten.
• Repeat this procedure to assemble the other rear wheel, hub
and remaining screw.
Battery Safety Information
In exceptional circumstances, batteries may leak fluids that
can cause a chemical burn injury or ruin your toy. To avoid
battery leakage:
• Do not mix old and new batteries or batteries of different types:
alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the battery compartment.
• Remove batteries during long periods of non-use. Always
remove exhausted batteries from the toy. Dispose of batteries
safely. Do not dispose of the product in a fire. The batteries
inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type,
as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging.
• If removable, rechargeable batteries are used, they are only to
be charged under adult supervision.
1,5V x 3
“AA” (LR6)
For best performance, we recommend that you replace the
batteries that came with this toy with three, new “AA” (LR6)
alkaline batteries.
• Locate the battery compartment on the back of the puppy's head.
• Lift the seat to access the battery compartment.
• Loosen the screws in the battery compartment door with
a Phillips screwdriver. Remove the battery compartment door.
• Insert three “AA” (LR6)
alkaline
batteries.
• Replace the battery compartment door and tighten the screws.
• If this product begins to operate erratically, you may need to
reset the electronics. Slide the power/volume switch off and
then back on.
• When sounds or lights become faint or stop, it’s time for an
adult to change the batteries.
Battery Replacement
• Protect the environment by not disposing of this
product with household waste (2002/96/EC). Check
your local authority for recycling advice and facilities.
8
7
