background image

5

• Fit the pad upper pocket over the seat back tube.
•  From behind the assembly, insert the waist belts through the slots in 

the pad.

• Press to fasten the waist belt assembly to the pad.

Seat Back Tube

Pad Upper
Pocket

Waist Belts

8

Assembly

Slots

Slots

•  Fit the pad lower pocket onto the seat bottom tube, as shown.

Pad Lower Pocket

Seat Bottom Tube 

9

• Locate the battery compartment door on the frame.
• Loosen the screws in the battery compartment door.
• Remove the battery compartment door. 
• Insert four “C” (LR14) 

alkaline

 batteries.

Hint: 

We recommend using 

alkaline

 batteries for longer battery life.

•   Replace the battery compartment door and tighten the screws.
•   If this product begins to operate erratically, you may need to reset the 

electronics. Slide the power switch off and then back on.

Note:

 Low battery power may cause product movement to slow

or product to turn off all together. If this should happen, replace the 
batteries with four 

alkaline

 "C" (LR14) batteries.

Battery Compartment Door

Battery Installation

1,5V x 4

“C” (LR14)

In exceptional circumstances, batteries may leak fluids that can 
cause a chemical burn injury or ruin your product. To avoid 
battery leakage:

•  Do not mix old and new batteries or batteries of different types: 

alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).

•  Insert batteries as indicated inside the battery compartment.
•  Remove batteries during long periods of non-use. Always remove 

exhausted batteries from the product. Dispose of batteries safely. 
Do not dispose of this product in a fire. The batteries inside may 
explode or leak.

• Never short-circuit the battery terminals.
•  Use only batteries of the same or equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
•  Remove rechargeable batteries from the product before charging.
•  If removable, rechargeable batteries are used, they are only to be 

charged under adult supervision.

Battery Safety Information  

•  Protect the environment by not disposing of this product with 

household waste (2002/96/EC). Check your local authority 
for recycling advice and facilities (Europe only).

Summary of Contents for V9944









Reviews: