8
Swinging and Music
Music/Sound
Selection Switch
Swing Power/
Speed Switch
Sound Power/
Volume Switch
• Place your child in the seat and secure properly.
• Slide the
swing power/speed switch
ON
•
.
• Give the seat a light push to start the swinging motion. Adjust the
swing power/speed switch
to the desired swing motion setting.
Hints:
-
After turning on power, this product may not swing unless there
is a child in the seat.
-
As with most battery-powered swings, a heavier child will
reduce the amount of swinging motion on all settings. In most
cases, the low setting works best for a smaller child while the
high setting works best for a larger child.
- If the low setting provides too much swinging motion for your
child, try placing one end of a blanket underneath your child
and let the other end of the blanket drape down while swinging.
- If swinging stops while using a lower setting, try a higher
setting. Give the seat a light push to start the swinging
motion again.
• Slide the
sound power/volume switch
to ON with low volume ,
ON with high volume
or OFF .
• Slide the
music/sound selection switch
to
or
.
• Be sure to turn this product off when not in use. Slide the
swing
power/speed
and
sound power/volume switches
OFF .
Storage
PRESS
PRESS
PRESS
PRESS
• While pushing both recline buttons, fold the seat.
1
2
PRESS
PRESS
• While pushing both frame buttons, push the back legs inward.
The pad is machine washable. Wash the pad separately in cold
water on the gentle cycle. Do not use bleach. Tumble dry separately
on low heat and remove promptly. The frame can be wiped clean
using a mild cleaning solution and a damp cloth. Do not immerse
the frame.
To remove the pad:
• Pull the restraint belts through the slots in the pad.
• Fold the seat and lift the pad off the seat frame.
To re-assemble the pad:
• Refer to assembly steps 8-11.
Care
