BATTERY
INSTALLATION
BATTERY
BATTERY
INSTALLATION
INSTALLATION
5
• Lower the motor so that the open peg fits into
the groove in the base.
• Insert the battery plug into the socket in the
motor, as shown.
Hint:
If there isn’t a socket inside the peg, you’ve
positioned the motor/chute assembly backwards
in the base. Remove the motor/chute assembly
and turn it around. Repeat assembly step 4.
• Fit the cover over the peg and plug and into
the base.
• Insert two screws into the cover and tighten.
Assembly is now complete.
Socket
Plug
Groove
Cover
Peg
Plug
• Loosen the screws in the battery compartment
door and remove the battery compartment door.
• Insert four "D" (LR20)
alkaline
batteries into
the battery compartment.
• Replace the battery compartment door and
tighten the screws.
• When ball release distance is greatly reduced
or if the time between ball releases is long,
it’s time for an adult to replace the batteries!
Protect the environment by not disposing
of this product with household waste
(2002/96/EC). Check your local authority
for recycling advice and facilities
(Europe only).
1.5V x 4
"D" (LR20)
Battery Compartment
Tip: We recommend the use of alkaline
batteries for longer battery life!
ASSEMBLY
ASSEMBLY
ASSEMBLY
6
