4
4
Assembly
Front Panel
Groove
Freezer
Shelf
Side Panel
with Molded
Puppy
5
5
Refrigerator Opening
Refrigerator
Coils
Side Panel
Back Panel
• Position the back panel with the molded detail
upright. Make sure the refrigerator coils are over
the refrigerator openings.
• Fit the back panel onto the side panels.
6
6
Side Panel
Back Panel
• Insert eight screws through the back panel and into
the side panels. Tighten the screws with a Phillips
screwdriver. Do not over-tighten.
7
7
Base
• Position the assembly over the base, as shown.
• Insert and
“snap”
the tabs on the bottom of the
assembly into the slots in the base.
• Slide the freezer shelf into the grooves in the side
panel with the molded puppy and the front panel.
4
Groove
Side Panel
