Assembly
7
• While holding the seat wire in place, carefully turn the
seat around so that the front faces you.
• Position the seat wire cap so that the rounded edge
is upright.
• Fit each end of the seat wire through the hole in each
seat wire cap.
Ends of
Seat Wire
• Press the seat wire caps into place.
• Insert two #6 x 1.59 cm (
5
/
8
") screws through each seat wire
cap and tighten.
• Turn the seat face down.
• Fit an accessory bin into the groove on each side of the
seat, as shown.
• Insert two #8 x 3.49 cm (1
3
/
8
") screws into each accessory
bin and tighten.
Seat Wire Cap
Seat Wire
Cap
Grooves
Seat
Accessory Bin
Accessory Bin
Seat Wire Caps
14
15
16
• Lift the seat tubes slightly.
• With the seat wire hanging down, insert the ends of the seat
wire through the slots in the seat, as shown.
Slots
Seat Wire
13
#8 x 3.49 cm (1
3
/
8
”) Screw - 4
Shown Actual Size
#6 x 1.59 cm (
5
/
8
") Screw - 4
Shown Actual Size
Seat Wire
Cap Hole
Rounded Edge Up
Seat Wire is
Through Hole in
Seat Wire Cap
“Press” in Place
Hint:
The seat wire caps are designed to fit into the seat only
one way. If the screw holes in the seat wire cap does not align
with the holes in the seat, try switching the seat wire cap onto
the opposite ends of the seat wire.
